2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

P0575 Cruise Control Input Circuit

Diagnostic trouble codes · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.
DTC Code
DTC Detection
Condition Trouble Area
P0575
Either condition is met:
  1. The cruise control input signal is abnormal.
  2. The stop light switch input signal is abnormal.
ECM

INSPECTION PROCEDURE

NOTICE:
When the ECM is replaced with a new one, initialization must be performed (Click here).

HINT:
The ECM receives signals from each sensor to control all functions of the dynamic radar cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC P0575 is not output.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for 1GR-FE)
    B
    NG (for 1KD-FTV)
    C



B
REPLACE ECM (Click here)

C
REPLACE ECM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← P0575 Cruise Control Input Circuit (Aug 2013 – Jul 2014)P1570 Radar Sensor Malfunction (from Aug 2013) →