2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT COMMON RAIL ASSEMBLY

  1. A075928E01
    Inspect the fuel pressure sensor.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      2 - 3
      25°C (77°F)
      16.4 kΩ or less
      5 - 4
      25°C (77°F)
      16.4 kΩ or less
      1 - 2
      25°C (77°F)
      3 kΩ or less
      6 - 5
      25°C (77°F)
      3 kΩ or less

      If the result is not as specified, replace the common rail assembly.

  1. Inspect the pressure discharge valve.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.85 to 1.05 Ω

      If the result is not as specified, replace the common rail assembly.

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →