2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL BACK WINDOW LOCK ASSEMBLY
  1. Install the back window lock assembly with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the connector.


2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY
  1. w/o Back Door Tire Carrier:

    1. Attach the 15 clips to install the back door trim panel assembly.

    2. Install the bolt.

  1. w/ Back Door Tire Carrier:

    1. Attach the 16 clips to install the back door trim panel assembly.

    2. Install the bolt.

  1. for Face to Face Seat Type:

    1. Attach the 15 clips to install the back door trim panel assembly.

    2. Install the bolt.

  1. Install the screw.

  1. Attach the claw to install the cover.


3. INSTALL BACK DOOR LOCK COVER
  1. Attach the 6 claws to install the back door lock cover.


4. INSTALL TOOL CASE
  1. Attach the 2 claws to install the tool case.


5. INSTALL UPPER TOOL BOX PANEL SUB-ASSEMBLY

  1. B241605
    Attach the 3 claws.

  1. Install the upper tool box panel sub-assembly as shown in the illustration.


6. INSTALL BACK DOOR TRIM COVER

  1. B246520
    Attach the 4 claws.

  1. Install the back door trim cover as shown in the illustration.


7. INSTALL BACK DOOR SIDE GARNISH LH
  1. Attach the 2 clips and claw to install the back door side garnish.


8. INSTALL BACK DOOR SIDE GARNISH RH
  1. Attach the 2 clips and claw to install the back door side garnish.


9. INSTALL BACK DOOR CENTER GARNISH CLIP
  1. Attach the 4 clips to install the back door center garnish.

← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →