2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE LOWER BACK DOOR OUTSIDE GARNISH MOULDING LH

B238978E01
  1. Using a screwdriver, detach the 5 claws and remove the outside garnish moulding.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


2. REMOVE LOWER BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY LH

B238979
  1. Disconnect the connector and detach the clamp.

  1. Remove the screw.

  1. Detach the double-sided tape.

  1. Using a screwdriver, detach the 5 claws and remove the outside garnish.

    NOTICE:
    Be careful not to damage the vehicle body.


    B238980E01
    Text in Illustration 
    *1
    Protective Tape
    *2
    Double-sided Tape


3. REMOVE GLASS HATCH OPENER SWITCH ASSEMBLY

B238981
  1. Remove the screw and opener switch.


4. REMOVE SWITCH COVER

B238982
  1. Remove the switch cover.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →