INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL FUEL TANK BREATHER HOSE |
Install the fuel tank breather hose to the fuel sub tank.
| 2. INSTALL FUEL TANK TO FILLER PIPE HOSE |
Install the fuel tank to filler pipe hose to the fuel sub tank.
| 3. INSTALL FUEL TANK VENT TUBE ASSEMBLY |
Install a new gasket and the fuel tank vent tube with the 8 screws.
- Torque:
- 4.0 N*m{ 41 kgf*cm , 35 in.*lbf }
Attach the wire harness clamp.
| 4. INSTALL FUEL SUB TANK SUB-ASSEMBLY |
Set the fuel sub tank on a transmission jack and lift up the transmission jack.
Connect the 2 fuel tank bands with the 4 bolts.
- Torque:
- 40 N*m{ 408 kgf*cm , 30 ft.*lbf }
Connect the fuel sender gauge connector.
| 5. CONNECT FUEL TANK BREATHER HOSE |
Connect the fuel tank breather hose to the filler pipe.
| 6. CONNECT FUEL TANK TO FILLER PIPE HOSE |
Connect the fuel tank to filler pipe hose to the filler pipe.
| 7. CONNECT FUEL HOSE |
Connect the fuel evaporation hose, fuel breather hose and 3 fuel hoses.
| 8. INSTALL NO. 2 FUEL TANK PROTECTOR |
Install the No. 2 fuel tank protector with the 5 bolts.
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 10. BLEED AIR FROM FUEL SYSTEM |
- w/ DPF (Click here)
- w/o DPF (Click here)
| 11. INSPECT FOR FUEL LEAK |
- w/ DPF (Click here)
- w/o DPF (Click here)
