REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. REMOVE FUEL TANK SUB-ASSEMBLY |
Remove the fuel tank sub-assembly (Click here).
| 2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY |
Set SST on the retainer.

- SST
- 09808-14030
- HINT:
- Engage the claws of SST securely with the retainer holes to secure SST.
- Install SST while pressing the claws of SST against the retainer (towards the center of SST).
- Engage the claws of SST securely with the retainer holes to secure SST.
Using SST, loosen the retainer.

- SST
- 09808-14030
Text in Illustration 

Turn
- HINT:
- Fit the tips of SST onto the ribs of the retainer.
- NOTICE:
- When the retainer is loosened, be careful as the fuel suction with pump and gauge tube will spring upward from the force of the spring.
- Remove any foreign matter around the fuel suction with pump and gauge tube before this operation.
- When the retainer is loosened, be careful as the fuel suction with pump and gauge tube will spring upward from the force of the spring.
Remove the retainer.
Remove the fuel suction with pump and gauge tube assembly from the fuel tank.
- NOTICE:
- Be careful not to bend the arm of the fuel sender gauge.
Remove the gasket from the fuel tank.
