2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE FUEL FILTER ASSEMBLY (w/ Fuel Heater)

  1. A223224
    Disconnect the 2 fuel hoses.

  1. Disconnect the level warning switch connector and fuel heater connector.

  1. Remove the 2 nuts and fuel filter assembly.


2. REMOVE FUEL FILTER ASSEMBLY (w/ Clogging Switch)

  1. A223225
    Disconnect the 2 fuel hoses.

  1. Disconnect the level warning switch connector and clogging switch connector.

  1. Remove the 2 nuts and fuel filter assembly.


3. DRAIN FUEL

  1. A223226
    Loosen the fuel filter drain plug and drain the fuel from the fuel filter.


4. REMOVE FUEL FILTER COVER

  1. A223228
    Detach the level warning switch connector clamp from the fuel filter cap.

  1. Remove the bolt, fuel filter cover and fuel filter gasket.


5. REMOVE LEVEL WARNING SWITCH

  1. A223229
    Clamp the fuel filter assembly in a vise between aluminum plates.

    NOTICE:
    Be careful not to damage the fuel filter cap.

  1. Using pliers, remove the level warning switch.

    NOTICE:
    Be careful not to damage the level warning switch.

  1. Remove the warning switch gasket from the level warning switch.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →