INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1. INSTALL FUEL SENDER GAUGE ASSEMBLY |
Set the fuel sender gauge assembly on the fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

Text in Illustration *1
Fuel Sub-Tank


Slide
Connect the fuel sender gauge assembly connector.
| 2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank) |
Set the fuel sender gauge assembly on the fuel gauge support. Then slide the fuel sender gauge assembly upward to install it.

Text in Illustration *1
Fuel Gauge Support


Slide
- NOTICE:
- Make sure the part labeled A in the illustration is securely inserted into the hole of the fuel gauge support before sliding the fuel sender gauge assembly upward.
Install the 2 lead wires with the 2 screws.

- Torque:
- 2.0 N*m{ 20 kgf*cm , 18 in.*lbf }
Text in Illustration *1
Lead Wire (Black)
*2
Lead Wire (Red)
- NOTICE:
- Be sure to install the lead wires in the correct locations according to their color as shown in the illustration.
| 3. INSTALL FUEL TANK VENT TUBE ASSEMBLY |
for Single Tank Type:
Install the fuel tank vent tube assembly (Click here).
for Double Tank Type:
for Fuel Main Tank:
Install the fuel tank vent tube assembly (Click here).for Fuel Sub Tank:
Install the fuel tank vent tube assembly (Click here).
