INSPECTION
Inspection · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| INSPECT FUEL SENDER GAUGE ASSEMBLY |
Check that the float moves smoothly between F and E.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
2 - 3
Float position is F (upper)
13.5 to 16.5 Ω
Float position is E (lower)
405.5 to 414.5 Ω
| INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank) |
Check that the float moves smoothly between F and E.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Float position is F (upper)
13.5 to 16.5 Ω
Float position is E (lower)
405.5 to 414.5 Ω
