2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for Fuel Main Tank)
  1. Remove the fuel suction with pump and gauge tube assembly (Click here).


2. REMOVE FUEL TANK VENT TUBE ASSEMBLY (for Fuel Sub Tank)
  1. Remove the fuel tank vent tube assembly (Click here).


3. REMOVE FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

  1. A228320
    Disconnect the fuel sender gauge connector.

  1. A331218E01
    Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge assembly upward to remove it.
    Text in Illustration 
    V100135
    Press down
    V100136
    Slide


4. REMOVE FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

  1. A334479
    Remove the 2 screws.

  1. A334480E01
    Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge assembly downward to remove it.
    Text in Illustration 
    V100135
    Press down
    V100136
    Slide

← REMOVAL (Aug 2013 – Jul 2014)INSPECTION (Aug 2013 – Jul 2014) →