REMOVAL
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1.
REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for 5 Door) |
 |
Remove the fuel suction with pump and gauge tube assembly (Click here).
| 2.
REMOVE REAR FLOOR MAT SUPPORT PLATE (for 3 Door)
|
 |
Remove the 5 screws.
Detach the 6 claws and remove the rear floor mat rear support plate.
| 3.
REMOVE REAR FLOOR SERVICE HOLE COVER (for 3 Door) |
 |
- HINT:
- Fold back the floor mat so that the rear floor service hole cover can be removed.
- Remove the 3 screws and rear floor service hole cover.
| 4.
REMOVE FUEL SENDER GAUGE ASSEMBLY (for 5 Door) |
 |
- Disconnect the fuel sender gauge connector.
- Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge assembly upward to remove it.
Text in Illustration
 
|
Press down
|
 
|
Slide
|
| 5.
REMOVE FUEL SENDER GAUGE ASSEMBLY (for 3 Door) |
 |
- Disconnect the fuel sender gauge connector and fuel pump connector.
Remove the 5 screws and fuel sender gauge assembly.
Remove the gasket from the fuel sender gauge assembly.