2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE FUEL TANK SUB-ASSEMBLY
  1. Remove the fuel tank sub-assembly (Click here).


2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

  1. A243483E01
    Set SST on the fuel pump gauge retainer.
    SST
    09808-14030  

    HINT:
    1. Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.
    2. Install SST while pressing the claws of SST against the fuel pump gauge retainer (towards the center of SST).

  1. A243482E01
    Using SST, loosen the retainer.
    SST
    09808-14030  
    Text in Illustration 
    V100135
    Turn

    HINT:
    Fit the tips of SST onto the ribs of the retainer.

    NOTICE:
    1. When the retainer is loosened, be careful as the fuel suction with pump and gauge tube will spring upward from the force of the spring.
    2. Remove any foreign matter around the fuel suction with pump and gauge tube before this operation.

  1. Remove the retainer.

  1. Remove the fuel suction with pump and gauge tube assembly from the fuel tank.

    NOTICE:
    Be careful not to bend the arm of the fuel sender gauge.

  1. Remove the gasket from the fuel tank.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →