2013-2015 Land Cruiser Prado · Service Manual Suspension

C1884/84 Steering Angle Sensor Circuit Malfunction

Diagnostic trouble codes · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The stabilizer control ECU receives steering angle information from the steering angle sensor via CAN communication.
DTC Code
DTC Detection Condition
Trouble Area
C1884/84
Either condition is met:
  1. The stabilizer control ECU receives an error signal from the steering sensor for 5 seconds.
  2. A steering angle sensor BAT terminal open circuit malfunction signal is continuously received for 5 seconds.
  1. Steering angle sensor (Spiral cable sub-assembly)
  2. Steering angle sensor circuit
  3. Stabilizer control ECU

INSPECTION PROCEDURE

HINT:
If DTC U0126/71 and C1884/84 are output at the same time, perform the inspection necessary for the CAN communication system first (Click here).


1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)
  1. Check for steering angle sensor malfunction DTCs (Click here).

    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A


2. CHECK DTC
  1. Clear the DTCs (Click here).

  1. Perform a road test.

  1. Check for DTCs (Click here).

    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
REPLACE STABILIZER CONTROL ECU (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← C1884/84 Steering Angle Sensor Circuit Malfunction (Aug 2013 – Jul 2014)C1887/87 Acceleration Sensor Circuit Malfunction (Aug 2013 – Jul 2014) →