REASSEMBLY
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- NOTICE:
- Do not disconnect the hoses indicated in the illustration.

| 1.
INSTALL FUEL MAIN VALVE ASSEMBLY |
 |
- Apply a light coat of gasoline to 2 new O-rings and install the O-rings to the fuel main valve.
Text in Illustration
*1
|
New O-Ring
|
Install the fuel main valve to the fuel filter case.
- NOTICE:
- Make sure the O-rings are not cut or pinched during installation.
| 2.
INSTALL FUEL PUMP |
 |
Connect the fuel pump wire harness connector to the fuel pump.
- Apply a light coat of gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump.
Text in Illustration
*1
|
New O-Ring
|
*2
|
Fuel Pump Spacer
|
- Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter case.
Text in Illustration
*1
|
Fuel Filter Case
|
| 3.
INSTALL NO. 1 FUEL SUB-TANK |
 |
- Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.
- Attach the 3 claws to the claw holes.
Install the tube part to the No. 1 fuel sub-tank.
- Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the No. 1 fuel sub-tank.
Connect the jet pump to the No. 1 fuel sub-tank.
Text in Illustration
*1
|
Jet Pump
|
Connect the fuel pump connector.
| 4.
INSTALL FUEL SENDER GAUGE ASSEMBLY
|
 |
- Set the fuel sender gauge on the fuel sub-tank. Then slide the fuel sender gauge downward to install it.
Text in Illustration
*1
|
Fuel Sub-Tank
|
 
|
Slide
|
Connect the fuel sender gauge connector.