2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
  1. This accelerator pedal does not require lubrication.
  2. Do not apply oil or other lubrication to the accelerator pedal sensor assembly.
    If applied, the accelerator pedal sensor assembly must be replaced.
  3. Avoid excessive force to the accelerator pedal sensor.
  4. Do not disassemble the accelerator pedal sensor assembly.

  1. Install the accelerator pedal with the 2 nuts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the accelerator pedal sensor connector.

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →