2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
  1. Avoid physical shocks to the accelerator pedal.
  2. Do not disassemble the accelerator pedal assembly.
  3. This accelerator pedal does not require lubrication.
  4. Do not apply oil or other lubrication to the accelerator pedal sensor assembly.
    If applied, the accelerator pedal sensor assembly must be replaced.

  1. A222078
    Disconnect the accelerator pedal sensor connector.

  1. Remove the 2 nuts and accelerator pedal sensor.

← ON-VEHICLE INSPECTION (from Aug 2013)INSTALLATION (from Aug 2013) →