2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. INSTALL OIL PUMP ROTOR SET

  1. A097981E04
    Coat the oil pump rotor set with engine oil and place it into the pump body with the marks facing outward (oil pump cover side). Check that the rotors revolve smoothly.
    Text in Illustration 
    *1
    Alignment Mark


2. INSTALL OIL PUMP COVER

  1. A087020E01
    Install the oil pump cover with the 7 bolts.

    Torque:
    9.0 N*m{ 91 kgf*cm , 79 in.*lbf }


3. INSTALL OIL PUMP RELIEF VALVE

  1. A086864E01
    Coat the relief valve with engine oil.

  1. Insert the relief valve and spring into the pump body hole.

  1. Install a new gasket to the plug.

  1. Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }

← INSPECTION (from Aug 2013)INSTALLATION (Aug 2013 – Jul 2014) →