INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT LUMBAR SWITCH ASSEMBLY (for LHD) |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (H) - 5 (B)
Hold
Below 1 Ω
1 (R) - 2 (E)
2 (E) - 3 (H)
Off
2 (E) - 1 (R)
2 (E) - 3 (H)
Release
1 (R) - 5 (B)
Text in Illustration *1
Hold Switch
*2
Release Switch
*a
Component without harness connected
(Lumbar Switch)
| INSPECT LUMBAR SWITCH ASSEMBLY (for RHD) |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 (H) - 5 (B)
Hold
Below 1 Ω
3 (R) - 2 (E)
1 (H) - 2 (E)
Off
3 (R) - 2 (E)
1 (H) - 2 (E)
Release
3 (R) - 5 (B)
Text in Illustration *1
Hold Switch
*2
Release Switch
*a
Component without harness connected
(Lumbar Switch)



