2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the LH side.


1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Remove the front seat assembly (Click here).


2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
  1. Remove the front seat assembly (Click here).


3. REMOVE FRONT SEAT ASSEMBLY (for Walk in Seat Type)
  1. Remove the front seat assembly (Click here).


4. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY LH

B239190
  1. Disconnect the connector.

  1. Detach the 2 clamps and remove the seat heater control.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2014) →