INSTALLATION
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH |
![]() ![]() |
Set the seatback heater with the name stamp side facing the seatback cover.
Text in Illustration *1
Tack Pin
*2
Seatback Cover
*3
Seatback Heater
*4
Name Stamp
Install the seatback heater with new tack pins.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

Text in Illustration *1
Hog Ring Pliers
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.
- Be careful not to damage the cover.
Attach the 4 claws to install the 2 headrest supports.
w/ Front Seat Side Airbag:
Connect the seatback cover bracket to the seatback pad.
Install the seatback cover bracket to the seat frame with the nut.

- Torque:
- 5.5 N*m{ 56 kgf*cm , 49 in.*lbf }
- NOTICE:
- After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.
Close the 2 fasteners, and then close the seatback cover.


Text in Illustration *A
for Cloth Seat
*B
for Leather Seat
Using hog ring pliers, install 3 new hog rings.

Text in Illustration *1
Hog Ring Pliers
Connect the seat heater connector and attach the wire harness clamp.
Install the rubber band to the seat cushion spring.
| 3. INSTALL FRONT SEAT ASSEMBLY |
Install the front seat assembly (Click here).

