INSTALLATION
Removal / installation · Vehicles built from Aug 2013
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL REAR SEAT INNER BELT ASSEMBLY |
Install the inner belt with the nut.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
| 2. INSTALL REAR SEAT ASSEMBLY RH |
Install the rear seat assembly RH (Click here).
