2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


1. INSTALL VOLTAGE INVERTER ASSEMBLY
  1. Install the voltage inverter with the 2 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the connector.


2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
  1. Connect the connector.

  1. Attach the 9 claws and 11 clips to install the deck trim side panel.

  1. Install the 3 bolts and 2 screws.

  1. Install the rear No. 1 seat outer belt floor anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the front seat outer belt floor anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


3. INSTALL OUTER LAP BELT ANCHOR COVER

HINT:
Use the same procedure for the other outer lap belt anchor cover.

  1. Attach the 3 claws to install the outer lap belt anchor cover.


4. INSTALL QUARTER TRIM POCKET TRAY
  1. Attach the 6 claws and 2 guides to install the quarter trim pocket tray.


5. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

HINT:
Use the same procedure for the other front deck side trim cover.

  1. Attach the 2 claws to install the front deck side trim cover.


6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

HINT:
Use the same procedure for the other tonneau cover holder cap.

  1. Attach the 2 claws to install the tonneau cover holder cap.


7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

HINT:
Use the same procedure for the other No. 1 luggage compartment trim hook.

  1. Install the No. 1 luggage compartment trim hook so that it is positioned horizontally.


8. INSTALL REAR FLOOR CARPET ASSEMBLY
  1. Install the rear floor carpet.


9. INSTALL QUARTER TRIM COVER HOLE RH

HINT:
Use the same procedure described for the LH side.


10. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
  1. Attach the 6 claws to install the rear floor mat rear support plate.

  1. Install the 5 screws.


11. INSTALL MAT SET PLATE COVER

HINT:
Use the same procedure for all mat set plate covers.

  1. Attach the 2 claws to install the mat set plate cover.


12. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
  1. Install the tonneau cover.


13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:
Use the same procedure described for the LH side.


14. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.

← REMOVAL (from Aug 2014)INSTALLATION (from Aug 2014) →