INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL POWER OUTLET SOCKET COVER |
Attach the 2 claws to install the socket cover.
| 2. INSTALL POWER OUTLET SOCKET ASSEMBLY |
Attach the claw to install the power outlet socket.
| 3. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) |
Connect each connector.
Attach the 8 clips and 2 claws to install the console panel.
| 4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) |
![]() ![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 5. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) |
Connect each connector.
Attach the 8 clips and 2 claws to install the console panel.
| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) |
![]() ![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
Install the shifting hole cover to the shift lever knob.
Text in Illustration *1
Shifting Hole Cover
| 7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH |
w/o Seat Heater System:
Connect the connector.
Attach the 5 clips to install the front console upper panel garnish.
w/o CRAWL:
Connect each connector.
Attach the 5 clips to install the front console upper panel garnish.
w/ CRAWL:
Attach the 5 clips to install the front console upper panel garnish.
| 8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH |
Attach the 4 clips to install the instrument panel finish panel end RH.
| 9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
Attach the 4 clips to install the instrument panel finish panel end LH.
| 10. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
Connect the connector.
Attach the 4 clips to install the integration control and panel assembly.



