REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
![]() ![]() |
Detach the 4 clips and 4 claws.
Disconnect each connector and remove the rear console end panel.
| 2. REMOVE POWER OUTLET SOCKET ASSEMBLY |
While pulling the claw of the power point socket in the direction of the arrow, push the power point socket toward the inside of the chamber to remove it.

| 3. REMOVE POWER OUTLET SOCKET COVER NO.2 |
Detach the 2 claws and remove the socket cover.


