REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE POWER OUTLET SOCKET BEZEL |
Put protective tape around the power outlet socket bezel.

Text in Illustration *1
Protective Tape
Using a moulding remover, detach the 4 claws and remove the bezel.
Disconnect the connector.
| 2. REMOVE POWER OUTLET SOCKET ASSEMBLY |
Using a screwdriver, detach the claw and remove the power outlet socket.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
| 3. REMOVE POWER OUTLET SOCKET COVER |
Detach the 2 claws and remove the socket cover.

| 4. REMOVE POWER OUTLET SOCKET ASSEMBLY (for AC Power Supply) |
Put protective tape around the power outlet socket.

Text in Illustration *1
Protective Tape
Using a moulding remover, detach the 4 claws and remove the power outlet socket.
Disconnect the connector.

