2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
When installing the front fender emblem, heat the front fender emblem and vehicle body using a heat light.

Standard:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Front Fender Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body or front fender emblem excessively.


1. REMOVE FRONT FENDER EMBLEM
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new front fender emblem.

    1. Using a heat light, heat the vehicle body and a new front fender emblem.

    2. Remove the peeling paper from the face of the front fender emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

  1. Install the fender emblem in the position shown in the illustration.

    B236247E01

    Text in Illustration 
    *a
    Reference Values
    *b
    Fender Relief
    *c
    Fender End Line
    -
    -

← REMOVAL (from Aug 2013)COMPONENTS (from Aug 2013) →