INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL BACK SONAR OR CLEARANCE SONAR SWITCH ASSEMBLY |
Attach the 2 claws to install the back sonar or clearance sonar switch.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY |
Connect each connector.
Attach the 4 clips to install the instrument panel finish panel.
