2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE FUEL FILTER ASSEMBLY

  1. A223871
    Disconnect the 2 fuel hoses.

  1. Disconnect the level warning switch connector.

  1. Remove the 2 nuts and fuel filter.


2. DRAIN FUEL

  1. A225894
    Loosen the fuel filter drain plug and drain the fuel from the fuel filter.


3. REMOVE FUEL FILTER CASE

  1. A225895
    Detach the level warning switch connector clamp from the fuel filter cap.

  1. Remove the 2 bolts, fuel filter case and fuel filter gasket.


4. REMOVE LEVEL WARNING SWITCH

  1. A223875
    Clamp the fuel filter cap in a vise between aluminum plates.

    NOTICE:
    Be careful not to damage the fuel filter cap.

  1. Using pliers, remove the level warning switch.

    NOTICE:
    Be careful not to damage the level warning switch.

  1. Remove the warning switch gasket from the level warning switch.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →