REMOVAL
Removal / installation · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
| 1.
REMOVE CENTER BACK DOOR GARNISH
|
 |
- Detach the 4 clips and remove the back door center garnish.
| 2.
REMOVE BACK DOOR SIDE GARNISH LH
|
 |
- Detach the 2 clips and claw and remove the back door side garnish.
| 3.
REMOVE BACK DOOR SIDE GARNISH RH
|
 |
- Detach the 2 clips and claw and remove the back door side garnish.
| 4.
REMOVE BACK DOOR TRIM COVER
|
 |
- Remove the back door trim cover as shown in the illustration.
| 5.
REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY
|
 |
- Remove the upper tool box panel sub-assembly as shown in the illustration.
| 6.
REMOVE TOOL CASE
|
 |
- Detach the 2 claws and remove the tool case.
| 7.
REMOVE BACK DOOR LOCK COVER
|
 |
- Using moulding remover B, detach the clip and 6 claws and remove the back door lock cover.
| 8.
REMOVE BACK DOOR TRIM PANEL ASSEMBLY
|
 |
- Detach the claw and remove the cover.
- HINT:
- Tape the screwdriver tip before use.
- Remove the screw.
w/o Back Door Tire Carrier:
- Remove the bolt.
Detach the 15 clips and remove the back door trim panel assembly.
w/ Back Door Tire Carrier:
- Remove the bolt.
Detach the 16 clips and remove the back door trim panel assembly.
for Face to Face Seat Type:
- Remove the screw and bolt.
Detach the 15 clips and remove the back door trim panel assembly.
| 9.
REMOVE BACK DOOR SERVICE HOLE COVER
|
 |
- Remove the service hole cover.
| 10.
REMOVE REAR TELEVISION CAMERA ASSEMBLY |
 |
Disconnect the connector.
Remove the 2 bolts and rear television camera.