INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT SEAT MEMORY SWITCH (for LHD) |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (M1) - 1 (E)
1 switch pressed
Below 1 Ω
4 (M2) - 1 (E)
2 switch pressed
2 (MRY) - 1 (E)
SET switch pressed
Text in Illustration *1
SET Switch
*2
1 Switch
*3
2 Switch
*a
Component without harness connected
(Seat Memory Switch)
| INSPECT SEAT MEMORY SWITCH (for RHD) |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (M1) - 1 (E)
1 switch pressed
Below 1 Ω
4 (M2) - 1 (E)
2 switch pressed
2 (MRY) - 1 (E)
SET switch pressed
Text in Illustration *1
SET Switch
*2
1 Switch
*3
2 Switch
*a
Component without harness connected
(Seat Memory Switch)



