2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. REMOVE FUEL PUMP

  1. A223164
    Disconnect the lead wire connector from the fuel pump.

  1. A223165E01
    Pull out the lower side of the fuel pump from the fuel pump bracket.
    Text in Illustration 
    *1
    Fuel Pump Bracket

  1. A223166
    Disconnect the fuel hose from the fuel pump and remove the fuel pump.

  1. Remove the rubber cushion from the fuel pump.


2. REMOVE FUEL PUMP FILTER

  1. A224575
    Using a small screwdriver, pry out the clip.

  1. Pull out the pump filter.

← REMOVAL (from Aug 2014)INSPECTION (from Aug 2013) →