INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH |
Install the inner belt with the 2 bolts.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
| 2. CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY RH |
Connect the 3 point type belt floor anchor with the bolt.

- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- The anchor part of the seat belt must not overlap the protruding part.
Text in Illustration *a
Protruding Part
Return the seat cushion to its original position.
