TORQUE SPECIFICATIONS
Specifications · Vehicles built from Aug 2013
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Retainer plate x Generator drive end frame assembly |
2.3 |
23 |
20 in.*lbf |
| Generator coil assembly x Generator drive end frame assembly |
5.9 |
60 |
52 in.*lbf |
| Generator brush holder assembly x Generator coil assembly |
1.8 |
18 |
16 in.*lbf |
| Generator rear end cover x Generator coil assembly |
4.6 |
46 |
40 in.*lbf |
| Cord clip x Generator rear end cover |
6.2 |
63 |
55 in.*lbf |
| Generator with clutch pulley x Generator rotor assembly |
80 (64) |
816 (653) |
59 (47) |
| Generator bracket x Generator assembly |
20 |
204 |
15 |
| Generator assembly x Timing chain cover |
43 |
438 |
32 |
| Generator bracket x Cylinder block |
20 |
204 |
15 |
| Wire harness x Generator assembly |
8.0 |
82 |
71 in.*lbf |
| Generator wire x Generator assembly |
9.8 |
100 |
87 in.*lbf |
| Wiring harness clamp bracket x Body |
8.0 |
82 |
71 in.*lbf |
| No. 2 idler pulley x Timing chain cover |
54 |
551 |
40 |
| Battery hold down clamp x Body |
6.0 |
61 |
53 in.*lbf |
| Positive (+) battery terminal x Positive (+) battery cable |
5.4 |
55 |
48 in.*lbf |
| Negative (-) battery terminal x Negative (-) battery cable |
5.4 |
55 |
48 in.*lbf |