2013-2015 Land Cruiser Prado · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Aug 2013

HEADLIGHT DIMMER SWITCH (for LH Side) 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Component without harness connected
20 (H) - 12 (E)
Light control switch off
10 kΩ or higher
18 (T) - 12 (E)
19 (A) - 12 (E)
19 (A) - 12 (E)
Light control switch auto
Below 1 Ω
18 (T) - 12 (E)
Light control switch tail
Below 1 Ω
18 (T) - 12 (E)
Light control switch head
Below 1 Ω
20 (H) - 12 (E)
11 (HU) - 12 (E)
Headlight dimmer switch flash
Below 1 Ω
17 (HF) - 12 (E)
11 (HU) - 12 (E)
Headlight dimmer switch hi beam
Below 1 Ω
13 (TR) - 12 (E)
Turn signal switch right turn
Below 1 Ω
13 (TR) - 12 (E)
Turn signal switch right lane change
Below 1 Ω
13 (TR) - 12 (E)
Turn signal switch neutral
10 kΩ or higher
15 (TL) - 12 (E)
15 (TL) - 12 (E)
Turn signal switch left lane change
Below 1 Ω
15 (TL) - 12 (E)
Turn signal switch left turn
Below 1 Ω
4 (BFG) - 3 (LFG)
Fog light switch off
10 kΩ or higher
2 (B) - 3 (LFG)
4 (BFG) - 3 (LFG)
Front fog light switch on
Below 1 Ω
4 (BFG) - 3 (LFG)
Rear fog light switch on
Below 1 Ω
2 (B) - 3 (LFG)
HEADLIGHT DIMMER SWITCH (for RH Side) 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Component without harness connected
11 (H) - 19 (EL)
Light control switch off
10 kΩ or higher
13 (T) - 19 (EL)
12 (A) - 19 (EL)
12 (A) - 19 (EL)
Light control switch auto
Below 1 Ω
13 (T) - 19 (EL)
Light control switch tail
Below 1 Ω
13 (T) - 19 (EL)
Light control switch head
Below 1 Ω
11 (H) - 19 (EL)
20 (HU) - 19 (EL)
Headlight dimmer switch flash
Below 1 Ω
14 (HF) - 19 (EL)
20 (HU) - 19 (EL)
Headlight dimmer switch hi beam
Below 1 Ω
16 (TR) - 19 (EL)
Turn signal switch right turn
Below 1 Ω
16 (TR) - 19 (EL)
Turn signal switch right lane change
Below 1 Ω
16 (TR) - 19 (EL)
Turn signal switch neutral
10 kΩ or higher
18 (TL) - 19 (EL)
18 (TL) - 19 (EL)
Turn signal switch left lane change
Below 1 Ω
18 (TL) - 19 (EL)
Turn signal switch left turn
Below 1 Ω
7 (BFG) - 8 (LFG)
Fog light switch off
10 kΩ or higher
9 (B) - 8 (LFG)
7 (BFG) - 8 (LFG)
Front fog light switch on
Below 1 Ω
7 (BFG) - 8 (LFG)
Rear fog light switch on
Below 1 Ω
9 (B) - 8 (LFG)
HAZARD WARNING SWITCH (w/o Display) 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Component without harness connected
3 - 16
Hazard warning signal switch off
10 kΩ or higher
Hazard warning signal switch on
Below 1 Ω
HAZARD WARNING SWITCH (w/ Display) 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Component without harness connected
4 - 1
Hazard warning signal switch off
10 kΩ or higher
Hazard warning signal switch on
Below 1 Ω
HEADLIGHT LEVELING SWITCH 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Component without harness connected
1 (B) - 2 (T)
0
10.4 to 11.2 V
1
8.52 to 9.24 V
2
6.6 to 7.32 V
3
4.68 to 5.4 V
4
2.76 to 3.48 V
5
0.84 to 1.56 V
STOP LIGHT SWITCH 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Front view of wire harness connector
1 (B) - 3 (GND)
Engine switch off
11 to 14 V
5 (B) - 3 (GND)
Engine switch ON
11 to 14 V
3 (GND) - Body ground
Always
Below 1 Ω
Component with harness connected
2 (L) - 3 (GND)
Engine switch off, brake pedal not depressed
Below 1 V
2 (L) - 3 (GND)
Engine switch off, brake pedal depressed
11 to 14 V
4 (L) - 3 (GND)
Engine switch ON, brake pedal not depressed
11 to 14 V
4 (L) - 3 (GND)
Engine switch ON, brake pedal depressed
Below 1 V
HEIGHT CONTROL SENSOR 
Connector Condition
Tester Connection
Condition
Specified Condition
Component without harness connected
2 (SHRR) - 3 (SHG)
Max. high (45°)
4.4 to 4.6 V
Normal (0°)
2.3 to 2.6 V
Min. low (-45°)
0.4 to 0.6 V
TURN SIGNAL FLASHER ASSEMBLY 
Connector Condition
Tester Connection
Condition
Specified Condition
Front view of wire harness connector
5 (E) - Body ground
Always
Below 1 Ω
2 (LR) - 7 (E)
Hazard warning switch off
Below 1 V
Hazard warning switch on
Alternating between 11 to 14 V and below 1 V (60 to 120 times per minute)
3 (LL) - 7 (E)
Hazard warning switch off
Below 1 V
Hazard warning switch on
Alternating between 11 to 14 V and below 1 V (60 to 120 times per minute)
4 (B) - 7 (E)
Always
11 to 14 V
5 (EL) - 7 (E)
Ignition switch ON Headlight dimmer switch (turn left) off
9 V or higher
Ignition switch ON Headlight dimmer switch (turn left) on
Below 1 V
6 (ER) - 7 (E)
Ignition switch ON Headlight dimmer switch (turn right) off
9 V or higher
Ignition switch ON Headlight dimmer switch (turn right) on
Below 1 V
8 (HAZ) - 7 (E)
Hazard warning switch off
9 V or higher
Hazard warning switch on
Below 1 V
STOP LIGHT CONTROL RELAY 
Connector Condition
Tester Connection
Switch Condition
Specified Condition
Front view of wire harness connector
A52-5 (STP) - Body ground
Brake pedal released
Below 1 V
Brake pedal depressed
11 to 14 V
A52-6 (+B) - Body ground
Always
11 to 14 V
Component with harness connected
A52-8 (GND) - Body ground
Always
Below 1 Ω
A52-1 (OUT) - Body ground
Brake pedal released
Below 1 V
Brake pedal depressed
11 to 14 V
RELAY 
Connector Condition
Tester Connection
Condition
Specified Condition
-
3 - 5
Battery voltage not applied to terminals 1 and 2
10 kΩ or higher
Battery voltage applied to terminals 1 and 2
Below 1 Ω
← TORQUE SPECIFICATIONS (from Aug 2013)TORQUE SPECIFICATIONS (from Aug 2013) →