2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

CUSTOMIZE PARAMETERS

Removal / installation · Vehicles built from Aug 2013


1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the intelligent tester on.

  1. Enter the following menus: Customize Setting / Light Control.

  1. Select the setting by referring to the table below.

    Light Control 
    Display
    Default
    Content
    Setting
    Response Time
    Normal
    Changes the delay timing of illuminating the taillights when going into a tunnel when the headlight dimmer switch is in the AUTO position.
    Long or Normal
    Sensitivity
    Normal
    Function to adjust the ambient light sensitivity of the automatic light control system.*1
    Light2, Light1, Normal, Dark1 or Dark2
    Disp Ex ON Sen
    Normal
    Function to change the level of ambient light at which the system dims lights such as the indicator lights of the combination meter, the A/C indicator light and the clock.*2
    Light2, Light1, Normal, Dark1 or Dark2
    Disp Ex OFF Sen
    Normal
    Function to change the level of ambient light at which the system cancels the dimming of lights such as the indicator lights of the combination meter, the A/C indicator light and the clock.*3
    Light2, Light1, Normal, Dark1 or Dark2
    Light Auto OFF Delay
    30s
    Function to continue illuminating the headlights for a certain period of time after closing all the doors with the ignition switch turned from ON to off under the condition that the headlight dimmer switch is in the head or AUTO position with the headlights on.
    OFF, 30s, 60s or 90s

    HINT:
    The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

    *1 
    System Setting
    E224788
    Setting
    Dark2
    Dark1
    Normal
    Light1
    Light2

    HINT:
    When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

    *2 
    System Setting
    E224788
    Setting
    Dark2
    Dark1
    Normal
    Light1
    Light2

    HINT:
    When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

    *3 
    System Setting
    E224788
    Setting
    Dark2
    Dark1
    Normal
    Light1
    Light2

    HINT:
    When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

  1. Customizing with the Multi-display

    1. Turn the ignition switch to ON.

    2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Lights settings.

    3. Select the setting by referring to the table below.

      Vehicle settings 
      Display
      Default
      Content
      Setting
      Light sensor sensitivity
      0
      Adjusts the sensitivity of the automatic light control system.*1
      -2, -1, 0, +1 or +2
      Headlamps auto-off timer
      30s
      Keep the headlights on for a certain period of time after turning the ignition switch off and closing all doors with the low beam headlights on.
      Off, 30s, 60s or 90s
      Daytime running lights
      ON
      ON/OFF of the DRL function
      On or Off
      Exterior lights off timer
      15s
      Changes the lighting time of the door mirror foot lights.
      Off, 7.5s, 15s or 30s

      HINT:
      The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

      *1 
      Sensitivity of the automatic light control system
      E224788
      Setting
      -2
      -1
      0
      +1
      +2

← OPERATION CHECK (from Aug 2013)INITIALIZATION (from Aug 2013) →