2013-2015 Land Cruiser Prado · Service Manual Steering

CUSTOMIZE PARAMETERS

Removal / installation · Vehicles built from Aug 2013


1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Connect the intelligent tester to the DLC3.

  1. Turn the engine switch on (IG).

  1. Turn the intelligent tester on.

  1. Enter the following menus: Body / Tilt & Telescopic / Utility / Customize.

  1. Select a new setting by referring to the table below.

    Tilt & Telescopic 
    Display
    Default
    Contents
    Setting
    Autoaway/Return function
    ON
    Turn the auto away/return function ON or OFF
    ON/OFF

← HOW TO PROCEED WITH TROUBLESHOOTING (from Aug 2014)PROBLEM SYMPTOMS TABLE (Aug 2013 – Jul 2014) →