2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

CUSTOMIZE PARAMETERS

Removal / installation · Vehicles built from Aug 2013


1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
  1. Customizing with the intelligent tester

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Door Lock.

    5. Select the setting by referring to the table below.

      Door Lock 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Unlock Key Twice
      OFF
      Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors
      ON or OFF
      Main body ECU (multiplex network body ECU)
      Auto Lock*
      ON
      Function that locks all doors when the vehicle speed reaches a certain level
      ON or OFF
      Main body ECU (multiplex network body ECU)
      Auto Lock/Shift*
      OFF
      Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed
      ON or OFF
      Main body ECU (multiplex network body ECU)
      Auto Unlock/Shift*
      OFF
      Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON
      ON or OFF
      Main body ECU (multiplex network body ECU)
      All Unlock/Open-Close*
      OFF
      Function that unlocks the other doors when the driver door is opened within 43 seconds after the ignition switch is turned off
      ON or OFF
      Main body ECU (multiplex network body ECU)
      1. *: w/ Collision door lock release function


2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY
  1. Customizing with Multi-display

    1. Turn the ignition switch ON.

    2. Select the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.

    3. Select the setting by referring to the table below.

      Door Lock 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Unlock on second key turn
      OFF
      Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors
      ON or OFF
      Main body ECU (multiplex network body ECU)
      Speed sensitive auto locking*
      ON
      Function that locks all doors when the vehicle speed reaches a certain level
      ON or OFF
      Main body ECU (multiplex network body ECU)
      Auto lock by shift from P*
      OFF
      Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed
      ON or OFF
      Main body ECU (multiplex network body ECU)
      Auto unlock by shift to P*
      OFF
      Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON
      ON or OFF
      Main body ECU (multiplex network body ECU)
      Auto unlock by driver door*
      OFF
      Function that unlocks the other doors when the driver door is opened within 43 seconds after the ignition switch is turned off
      ON or OFF
      Main body ECU (multiplex network body ECU)
      1. *: w/ Collision door lock release function

← OPERATION CHECK (from Aug 2013)PROBLEM SYMPTOMS TABLE (Aug 2013 – Jul 2014) →