CUSTOMIZE PARAMETERS
Removal / installation · Vehicles built from Aug 2013
| 1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- When the customer requests a change in a function, first make sure that the function can be customized.
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Power Window.
Select the setting by referring to the table below.
Display
Default
Content
Setting
Door Key P/W Up
OFF
This function is used to close the windows by operating the mechanical key.
ON or OFF
Door Key P/W Down
OFF
This function is used to open the windows by operating the mechanical key.
ON or OFF
P/W Up w/ Transmitter
OFF
This function is used to close the windows using the wireless key transmitter.
ON or OFF
P/W Down w/ Transmitter
OFF
This function is used to open the windows using the wireless key transmitter.
ON or OFF
P Window Auto Up
Avail
This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side).
Avail or Not Avl
P Window Auto Up From Driver
Avail
This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch.
Avail or Not Avl
RR Window Auto Up
Avail
This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH.
Avail or Not Avl
RR Window Auto Up From Driver
Avail
This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch.
Avail or Not Avl
RL Window Auto Up
Avail
This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH.
Avail or Not Avl
RL Window Auto Up From Driver
Avail
This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch.
Avail or Not Avl
