CUSTOMIZE PARAMETERS
Removal / installation · Vehicles built from Aug 2013
| 1. CUSTOMIZE THEFT DETERRENT SYSTEM |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When the customer requests a change in a function, first make sure that the function can be customized.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Utility / Customize.
Select the setting by referring to the table below.
Security Display
Default
Contents
Setting
Intrusion Win Opened*1
OFF
The function to change the sensitivity of the intrusion sensor when a window is open.
ON or OFF
Security control with mechanism key*2
OFF
This function makes it possible to cancel the security alarm with the mechanical key.
ON or OFF
- *1: w/ Intrusion Sensor
- *2: Vehicles displaying the Item "Security control with mechanism key" on the intelligent tester
- *1: w/ Intrusion Sensor
