2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT LIGHT CUT RELAY

E284285
  1. Remove the light cut relay from the engine room relay box.

  1. E256070E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Battery voltage not applied to terminals 1 and 2
    10 kΩ or higher
    Battery voltage applied to terminals 1 and 2
    Below 1 Ω

    If the result is not as specified, replace the light cut relay.

  1. Install the light cut relay to the engine room relay box.

← INSTALLATION (from Aug 2013)PRECAUTION (from Aug 2013) →