MirrorLink Function cannot be Started
Circuit diagnosis · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
INSPECTION PROCEDURE
- HINT:
- When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
| 1. CHECK SMARTPHONE |
Check that the connected smartphone is powered on.
Result Result
Proceed to
The connected smartphone is powered on.
A
The connected smartphone is not powered on.
B
|
|
||||
| A | |
| 2. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY |
Check that "MirrorLink" is not illuminated on the information screen of the radio and display receiver assembly.
Result Result
Proceed to
"MirrorLink" is not illuminated.
A
"MirrorLink" is illuminated.
B
|
|
||||
| A | |
| 3. CHECK SMARTPHONE |
Refer to System Description and check if the connected smartphone is "MirrorLink" compatible (Click here).
Result Result
Proceed to
The connected smartphone is "MirrorLink" compatible.
A
The connected smartphone is not "MirrorLink" compatible.
B
|
|
||||
| A | |
| 4. CHECK APPLICATION |
Refer to System Description and check if a "MirrorLink" compatible application is installed on the connected smartphone (Click here).
Result Result
Proceed to
A "MirrorLink" compatible application is installed.
A
A "MirrorLink" compatible application is not installed.
B
|
|
||||
| A | |
| 5. CHECK APPLICATION RUNNING STATUS |
Connect the smartphone to the head unit with a "MirrorLink" compatible application running and check if the "MirrorLink" function can be used.
- HINT:
- The "MirrorLink" function may not start if the application is not running.
Result Result
Proceed to
The "MirrorLink" function can be used.
A
The "MirrorLink" function cannot be used.
B
|
|
||||
| A | ||
| ||
