2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

MirrorLink Function cannot be Started

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE

HINT:
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK SMARTPHONE
  1. Check that the connected smartphone is powered on.

    Result 
    Result
    Proceed to
    The connected smartphone is powered on.
    A
    The connected smartphone is not powered on.
    B



B
TURN SMARTPHONE ON
A


2. CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check that "MirrorLink" is not illuminated on the information screen of the navigation receiver assembly.

    Result 
    Result
    Proceed to
    "MirrorLink" is not illuminated.
    A
    "MirrorLink" is illuminated.
    B



B
Go to step 4
A


3. CHECK SMARTPHONE
  1. Refer to System Description and check if the connected smartphone is "MirrorLink" compatible (Click here).

    Result 
    Result
    Proceed to
    The connected smartphone is "MirrorLink" compatible.
    A
    The connected smartphone is not "MirrorLink" compatible.
    B



B
CONNECT "MirrorLink" COMPATIBLE SMARTPHONE
A


4. CHECK APPLICATION
  1. Refer to System Description and check if a "MirrorLink" compatible application is installed on the connected smartphone (Click here).

    Result 
    Result
    Proceed to
    A "MirrorLink" compatible application is installed.
    A
    A "MirrorLink" compatible application is not installed.
    B



B
INSTALL "MirrorLink" COMPATIBLE APPLICATION
A


5. CHECK APPLICATION RUNNING STATUS
  1. Connect the smartphone to the head unit with a "MirrorLink" compatible application running and check if the "MirrorLink" function can be used.

    HINT:
    The "MirrorLink" function may not start if the application is not running.
    Result 
    Result
    Proceed to
    The "MirrorLink" function can be used.
    A
    The "MirrorLink" function cannot be used.
    B



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
A

END


← MirrorLink Function cannot be Started (Aug 2013 – Jul 2014)MirrorLink Image is not Displayed (Aug 2013 – Jul 2014) →