When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK USAGE CONDITION
Check the conditions under which the "MirrorLink" function is being used.
Result
Result
Proceed to
An image is displayed while the vehicle is stopped.
A
An image is not displayed while the vehicle is being driven or while the vehicle is stopped.
B
HINT:
Some applications have a display restriction in consideration of safe driving.
Refer to System Description and check if the application being used is "MirrorLink" compatible (Click here).
HINT:
Some applications require payment.
The names of applications are subject to change.
Result
Result
Proceed to
The application being used is "MirrorLink" compatible, but its image is not displayed.
A
The application being used is not "MirrorLink" compatible, and its image is not displayed.
B
HINT:
Some applications have a display restriction in consideration of safe driving.
B
USE "MirrorLink" COMPATIBLE APPLICATION AND CHECK AGAIN
A
3. CHECK SMARTPHONE
Check if an image is displayed on the "MirrorLink" compatible smartphone when a "MirrorLink" compatible application is running and it is disconnected from the head unit.
Result
Result
Proceed to
An image is displayed.
A
An image is not displayed.
B
HINT:
Restarting the smartphone may return the application operation to normal.
B
RESTART "MirrorLink" COMPATIBLE APPLICATION
A
4. CHECK APPLICATION RUNNING STATUS
Connect the smartphone to the head unit with a "MirrorLink" compatible application running and check if the "MirrorLink" function can be used and an image is displayed.
HINT:
Restarting the smartphone may return the application operation to normal.