When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK SMARTPHONE SETTINGS
Check the "MirrorLink" compatible smartphone settings.
Check that the volume is not set to "0".
Check that mute is off.
Check that silent mode is off.
Check that the sound of the "MirrorLink" compatible smartphone can be heard.
HINT:
Restarting the smartphone may return the application operation to normal.
OK:
Sound of the "MirrorLink" compatible smartphone can be heard.
NG
REPAIR OR REPLACE SMARTPHONE
OK
2. CHECK SMARTPHONE
Check if sounds can be heard from the "MirrorLink" compatible smartphone when a "MirrorLink" compatible application is running and it is disconnected from the head unit.
Result
Result
Proceed to
Sounds can be heard.
A
Sounds cannot be heard.
B
B
RESTART "MirrorLink" COMPATIBLE APPLICATION
A
3. CHECK APPLICATION RUNNING STATUS
Connect the smartphone to the head unit with a "MirrorLink" compatible application running and check if the "MirrorLink" function can be used and sounds can be heard.
HINT:
The "MirrorLink" function may not start if the application is not running.