2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Application Link Function cannot be Started

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE

HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK "iPhone" OR "iPod touch"
  1. Check that the connected "iPhone" or "iPod touch" is powered on.

    Result 
    Result
    Proceed to
    The connected "iPhone" or "iPod touch" is powered on
    A
    The connected "iPhone" or "iPod touch" is not powered on
    B



B
TURN "iPhone" OR "iPod touch" ON
A


2. CHECK CONNECTION CONDITION
  1. Check that the "iPhone" or "iPod touch" is connected to the head unit using a dedicated cable.

    Result 
    Result
    Proceed to
    Dedicated cable is used
    A
    Dedicated cable is not used
    B



B
USE DEDICATED CABLE
A


3. CHECK USAGE CONDITION
  1. Check the conditions under which the Application Link function is being used.

    Result 
    Result
    Proceed to
    The application does not automatically start when the ignition switch is turned from off to ON
    A
    The application closes after the hands-free function is used
    The application closes after another application is started on the "iPhone" or "iPod touch"
    None of the above
    B



B
Go to step 4
A

RESTART APPLICATION LINK COMPATIBLE APPLICATION

4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Check that "Connected services" is not illuminated on the information screen of the radio and display receiver assembly.

    Result 
    Result
    Proceed to
    "Connected services" is not illuminated
    A
    "Connected services" is illuminated
    B



B
Go to step 6
A


5. CHECK "iPhone" OR "iPod touch"
  1. Refer to System Description and check if the connected "iPhone" or "iPod touch" is Application Link compatible.

    Result 
    Result
    Proceed to
    The connected "iPhone" or "iPod touch" is Application Link compatible
    A
    The connected "iPhone" or "iPod touch" is not Application Link compatible
    B



B
CONNECT APPLICATION LINK COMPATIBLE "iPhone" OR "iPod touch"
A


6. CHECK APPLICATION
  1. Check if an Application Link compatible application is installed on the connected "iPhone" or "iPod touch".

    HINT:
    1. Some applications require payment.
    2. The names of applications are subject to change.

    Result 
    Result
    Proceed to
    An Application Link compatible application is installed
    A
    An Application Link compatible application is not installed
    B

    HINT:
    Some applications have a display restriction in consideration of safe driving.



B
INSTALL APPLICATION LINK COMPATIBLE APPLICATION
A


7. CHECK APPLICATION RUNNING STATUS
  1. Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, touch "Connected services" on the information screen of the radio and display receiver assembly with an Application Link compatible application running.

    HINT:
    1. Some applications require payment.
    2. The names of applications are subject to change.

    Result 
    Result
    Proceed to
    The Application Link function can be used
    A
    The Application Link function cannot be used
    B



B
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
A

END


← Application Link Function cannot be Started (Aug 2013 – Jul 2014)Application Link Function Image is not Displayed (Aug 2013 – Jul 2014) →