When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK CONNECTION CONDITION
Check that the "iPhone" or "iPod touch" is connected to the head unit using a dedicated cable.
Result
Result
Proceed to
Dedicated cable is used
A
Dedicated cable is not used
B
B
USE DEDICATED CABLE
A
2. CHECK USAGE CONDITION
Check the conditions under which the Application Link function is being used.
Result
Result
Proceed to
An image is displayed while the vehicle is stopped
A
An image is not displayed while the vehicle is being driven or while the vehicle is stopped
B
HINT:
Some applications have a display restriction in consideration of safe driving.
Check if an image is displayed on the "iPhone" or "iPod touch" when an Application Link compatible application is running and the "iPhone" or "iPod touch" is disconnected from the head unit.
Result
Result
Proceed to
An image is displayed
A
An image is not displayed
B
HINT:
Restarting the "iPhone" or "iPod touch" may return the application operation to normal.
B
RESTART APPLICATION LINK COMPATIBLE APPLICATION
A
4. CHECK APPLICATION RUNNING STATUS
Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, touch "Connected services" on the information screen of the navigation receiver assembly with an Application Link compatible application running.
HINT:
The Application Link function may not start if a compatible application is not running.
If another application is running on the "iPhone" or "iPod touch", the Application Link compatible application is not running.
Result
Result
Proceed to
An image is displayed
A
An image is not displayed
B
HINT:
Restarting the "iPhone" or "iPod touch" may return the application operation to normal.