2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Application Link Function Sound cannot be Heard

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE

HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK "iPhone" OR "iPod touch" SETTINGS
  1. Check the "iPhone" or "iPod touch" settings.

    1. Check that the volume is not set to "0".

    2. Check that mute is off.

    3. Check that silent mode is off.

  1. Check that the sound of the "iPhone" or "iPod touch" can be heard.

    HINT:
    Restarting the "iPhone" or "iPod touch" may return the application operation to normal.

    OK:
    Sound of the "iPhone" or "iPod touch" can be heard.



NG
REPAIR OR REPLACE "iPhone" OR "iPod touch"
OK


2. CHECK USAGE CONDITION
  1. Check the conditions under which the Application Link function is being used.

    Result 
    Result
    Proceed to
    Sounds cannot be heard after the ignition switch is turned from off to ON
    A
    Sounds cannot be heard after the hands-free function is used
    Sounds cannot be heard after another application is started on the "iPhone" or "iPod touch"
    None of the above
    B



B
Go to step 3
A

RESTART APPLICATION LINK COMPATIBLE APPLICATION

3. CHECK "iPhone" OR "iPod touch"
  1. Check if sounds can be heard from the "iPhone" or "iPod touch" when an Application Link compatible application is running and the "iPhone" or "iPod touch" is disconnected from the head unit.

    Result 
    Result
    Proceed to
    Sounds can be heard
    A
    Sounds cannot be heard
    B

    HINT:
    Restarting the "iPhone" or "iPod touch" may return the application operation to normal.



B
RESTART APPLICATION LINK COMPATIBLE APPLICATION
A


4. CHECK APPLICATION RUNNING STATUS
  1. Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, touch "Connected services" on the information screen of the radio and display receiver assembly with an Application Link compatible application running.

    HINT:
    1. The Application Link function may not start if a compatible application is not running.
    2. If another application is running on the "iPhone" or "iPod touch", the Application Link compatible application is not running.
      Result 
      Result
      Proceed to
      Sounds can be heard
      A
      Sounds cannot be heard
      B



B
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
A

END


← Application Link Function Sound cannot be Heard (Aug 2013 – Jul 2014)Application Link Function is Inoperative (Aug 2013 – Jul 2014) →