CUSTOMIZE PARAMETERS
Removal / installation · Vehicles built from Aug 2013
| 1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM |
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- When the customer requests a change in a function, first make sure that the function can be customized.
Customizing with the GTS.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Seat.
Select the setting by referring to the table below.
Tester Display
Default
Content
Setting
Relevant ECU
Seat Travel Distance
Normal
Allows customizing of the seat movement distance for the power easy access system.
OFF or Short or Normal
Main body ECU (Multiplex network body ECU)
Customizing with the Multi-display
- HINT:
- The following items can be customized.
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- When the customer requests a change in a function, first make sure that the function can be customized.
Turn the ignition switch to ON.
Enter the following menus: Setup / Vehicle / Vehicle Customization / Other vehicle settings.
Select the setting by referring to the table below.
Display
Default
Content
Setting
Relevant ECU
Driver's seat easy exit
Full
Allows customization of the seat movement distance for the power easy access system.
Full or Partial or Off
Main body ECU (Multiplex network body ECU)
