Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH(for 3 Door)
BM27T0E _01 Vehicle Exterior _054380 BODY WELD POINT _0264643 BACK DOOR OPENING TROUGH(for 3 Door) F

BODY WELD POINT  BACK DOOR OPENING TROUGH(for 3 Door)  CUT AND JOIN REPLACEMENT SECTIONS  


K132818

With the quarter panel removed.


REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

*a is only for installation.

4.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K132860C01
0.323,0.406 0.635,0.563 0.313,0.156 10 false *A 6.656,8.5 6.969,8.656 0.313,0.156 10 false *b 1.625,2.719 2.323,2.969 0.698,0.25 10 false 130 (5.12)
*A LH - -
*b mm (in.) - -


K132861C01
0.271,0.24 0.583,0.396 0.313,0.156 10 false *A 3.052,1.531 3.365,1.729 0.313,0.198 10 false *a
*A LH - -


K132862C01
0.281,0.26 0.594,0.417 0.313,0.156 10 false *A 6.604,8.396 6.917,8.552 0.313,0.156 10 false *b 4.927,2.823 5.688,3.292 0.76,0.469 10 false 130 (5.12)
*A RH - -
*b mm (in.) - -


K132863C01
0.521,1.698 0.833,1.896 0.313,0.198 10 false *a 0.24,0.281 0.552,0.479 0.313,0.198 10 false *A
*A RH - -