Home › Vehicle Exterior › BODY PANEL › ROOF PANEL(for Standard Roof)
BM27T0E _01 Vehicle Exterior _054380 BODY WELD POINT _0264653 ROOF PANEL(for Standard Roof) F

BODY WELD POINT  ROOF PANEL(for Standard Roof)  ASSEMBLY REPLACEMENT  


3 Door


K132827

a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points

K132885


b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

4.

Before temporarily installing the new parts, apply body sealer to the windshield header panel and roof panel reinforcement.

HINT:

Apply just enough body sealer for the new parts to make contact.


5.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

6.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

7.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K132886

K132887



5 Door


K125786

a.

REMOVAL

Symbol Meaning
K108818

Remove Weld Points

K125861


b.

INSTALLATION

Symbol Meaning
K108823

Plug Weld
K108834

Body Sealer

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

4.

Before temporarily installing the new parts, apply body sealer to the windshield header panel and roof panel reinforcement.

HINT:

Apply just enough body sealer for the new parts to make contact.


5.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

6.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

7.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K125862

K125863